corsair hydro series h80i v2 am4 mounting kit

#Corsair hydro series h80i v2 am4 mounting kit install#
#Corsair hydro series h80i v2 am4 mounting kit manual#

Replace the stock Intel bracket on your Hydro Series cooler with the AMD bracket provided in the kit.Insert the AM4 standoffs into the original AMD back plate, collared side down.Remove the stock AMD mounting clips from the front of your motherboard.Here is what’s included in the AM4 AMD Retention Bracket Kit:ĪMD AM4 Mounting Kit installation instructions: Older models are not compatible out-of-the-box, but you can use the following coolers with the AM4 socket if you also have the AM4 AMD Retention Bracket Kit: You can also check out our video on installing coolers:

#Corsair hydro series h80i v2 am4 mounting kit manual#

If you cannot find your product manual, you can use this manual for the H100i Platinum. If you want to see diagrams or more detailed installation instructions, consult your cooler product manual. Doing so will damage the retention hooks.

Tighten the thumbscrews until the cooler is secure.

#Corsair hydro series h80i v2 am4 mounting kit install#

Align your bracket with the stock AMD mounting clips and install the cooler by slipping the screw clip loops over the retention hooks.You need to have enough slack to get the screw clip loops over the retention hooks of the mounting clip. Do NOT tighten the thumbscrews all the way. /rebates/2fus2fen2fCategories2fProducts2fAccessories-257C-Parts2fPC-Components2fCooling2fAM4-AMD-Retention-Bracket-Kit-for-Hydro-Seriese284a2-Coolers2fp2fCW-8960046&.Install the AMD screw clips into the bracket and secure them with the thumbscrews.Make sure the bracket is evenly secured on all sides before installing your cooler.Install the AMD bracket by pushing both sides into the slot on the pump.Remove the pre-installed Intel mounting bracket from the cooler.To mount your cooler using the AM4 socket: To install your cooler in an AM4 system, you will need the following hardware: You do not need to use the AM4 AMD Retention Bracket Kit if you have one of the following coolers: corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-8.Most new Corsair liquid coolers are compatible with AMD’s AM4 socket out-of-the-box. corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-7.gifĪnd from there, proceed with your typical Hydro Series cooler installation (don't forget to plug in your power and USB cables)! (3) Replace the stock Intel bracket on your Hydro Series cooler with the AMD bracket provided in the kit. corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-6.gif (2) Insert the AM4 standoffs into the original AMD back plate, collared side down. corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-5.gif (1) Remove the stock AMD mounting clips from the front of your motherboard. corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-2.jpg /corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-3.jpg /corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-4.jpgĪMD AM4 Mounting Kit installation instructions: The Hydro Series coolers listed below are already compatible right out of the box:īut if you have one of these coolers listed below, you'll need to order the AMD Retention Bracket kit to install your Hydro Series cooler: corsairmedia/sys_master/productcontent/blog_AM4BracketInstallation-Content-1.png The Corsair AM4 AMD Retention Bracket kit is now available worldwide for those who have made the move to AMD’s latest platform along with our Hydro Series liquid CPU coolers.